• Experimental Study and Simulation of Multi-hole Extrusion Process 

  Das, Ratnakar (2012)

  Among all manufacturing processes, the extrusion technology has a special place because it produces parts of superior quality with minimum waste of material. The ever-increasing cost of material, energy and manpower requires ...
• Finite Element Analysis of Carbon Nanotube(CNT)-Reinforced Composites having a Broken CNT 

  Kirtania, Sushen (2016)

  The present thesis deals with three dimensional (3D) finite element (FE) analysis of carbon nanotube (CNT)-reinforced composites starting with determination of thermoelastic properties to failure analysis of such composites ...
• Synthesis and characterization of high oxygen storage capacity nanoparticles dispersed diesel for the emission reduction 

  Priya, Shanmuga N. (2016)

  In order to meet the increase in stringent regulation for exhaust gas emission from diesel vehicles, an exhaust-gas-after-treatment has become an essential process in most of the countries leading to use diesel particulate ...
• Circulating Fluidized Bed Combustor Towards Third Generation Of Oxy-Fuel Combustion 

  Zayoud, Azd (2016)

  Carbon capture and sequestration (CCS) is gaining popularity to mitigate the CO2 emission and greenhouse gases. The oxy-fuel circulating fluidized bed (CFB) combustion is one of the most promised techniques of CCS, where ...
• Performance of injection-moulded carbon nano-tube polypropylene asymmetric gears 

  Mertens, A. Johnney (2016)

  Polymer composite gears are being utilized in many engineering applications due to their light weight, self-lubrication, cost effectiveness, and mass production capabilities. However, thermal sensitive mechanical properties ...
• Inverse Estimation of Material Parameters, Convective Heat Transfer Coefficients and Friction in Warm Flat Rolling 

  Yadav, Vinod (2016)

  The estimation of material parameters, heat transfer coefficients and the coefficient of friction plays an important role in the modelling of the rolling process. Inverse method of estimating the material parameters avoids ...
• (A) Theoretical and Experimental Study of Thermal Autofrettage Process 

  Seikh Mustafa, Kamal (2016)

  Thick-walled cylinders/hollow-disks find wide range of industrial applications to withstand very high pressure. Pressure vessels, gun barrels, fuel injection system in diesel engines, nuclear reactor and fastener holes are ...
• Model based fault and system parameter identification in rotor-AMB systems with breathing crack 

  Singh, Sandeep (2015)

  Active Magnetic Bearings (AMB) find applications in new generation rotating machines, due to their versatilities. In context of AMB, the literature is rich on two aspects: first - research on control strategy to ensure ...
• Standardizing the Specifications of a Biogas run dual fuel diesel engine for stationary applications 

  Bora, Bhaskor Jyoti (2015)

  Diesel engines have played an important role in the progress of humankind. They are the most reliable and efficient means of producing power. However, these engines are plagued by high emissions of oxides of nitrogen and ...
• Gas Foil Bearing: Effect of Foil Materials and Stability Analysis Using Different Models for Foil Structure 

  Jamir, T. Moasunep (2015)

  Gas foil bearings (GFBs) are compliant surfaces, self-acting hydrodynamic bearings typically constructed from several layers of sheet metal foils. These foils rest on elastic support structure and their performance largely ...
• Experimental Investigation of Cereal Crop Drying in an Inclined Bubbling Fluidized Bed 

  Thant, Phyu Phyu (2016)

  Rice is the primary source of staple food for more than half of the world’s population. Drying of cereal crop is important in terms of maintenance of nutritional value of food, loss due to pest and fungi attack as well as ...
• Experimental and Computational Investigations of Force Prediction Methodology from Force Balances for Short Duration Applications 

  Babu, Pallekonda Ramesh (2015)

  Force measurement is one of the vital areas of research, which is essential in the design of any mechanical or electromechanical systems. Due to lack of sophisticated testing and force prediction on the scaled models in ...
• Shape Optimization of Revolute-Jointed Flexible Manipulators 

  Mahto, Sachindra (2015)

  Flexible robotic manipulator systems exhibit many advantages over the conventional robotic systems. However, they have not been favoured in production industries due to their vibration‐control issues. This thesis presents ...
• Experimental Investigation and Numerical Modeling of Deep Penetration laser and GTA Welding Processes 

  Nirsanametla, Yadaiah (2015)

  Fusion welding process is complex in nature since it involves several interactive physical phenomena. An accurate knowledge of weld induced distortions and residual stress. final micro structure and mechanical processes ...
• Design and Development of Low Cost Cement Reinforced Polymeric Composite Material for Fabrication of Automotive Parts 

  Sardar, Jagannath (2015-11)

  In the last few decades composite materials and the design and development technology have received great attention due to their numerous advantages over metallic materials. With the advancement of material processing ...
• Thermo-Electro-Hydrodynamic Investigations Of All-Vanadium Redox Flow Battery Using Lumped Model And Numerical Simulation 

  Sathisha, H M (2015)

  Renewable energy technology is needed urgently due to crisis and challenges against conventional energy's. However, intermittent and random nature of the non-conventional energy sources like solar and wind leads to low ...
• Design and Non-Linear Frequency-Response Analysis of Smart Functionally Graded Plates usinng a 1-3 Piezoelectric Composite 

  Kumar, Aravinda M. S. (2015)

  This dissertation deals with the design and analysis of smart functionally graded(FC) plates using a 1-3 piezoelectric fiber-reinforced composite (PERC). Two types of graded ...
• Aerodynamic Performance Evaluation of a Novel Savonius0Style Wind Turbine Through Unsteady Simulations and Wind Tunnel Experiments 

  Roy, Sukanta (2014)

  Recent instabilities in the world energy market due to depletion of fossil fuel source, global worming threat and increasing price of fossil derivatives necessitate the need of harnessing the clean and renewable sources of energy.
• Investigation on Biogas Generation and Purification Using Lignocellulosic Biomass and Cattle Dung 

  Das, Manjula (2015)

  Depletion of fossil fuel and increase in environmental pollution at an alarming rate has motivated the researchers to look for the environment friendly as well as cost effective alternative source of energy ...
• Characterization of Cylindrical and Elliptical Textured Journal Bearing 

  Ganji, Thrisekhar Reddy (2015)

  Surface texturing is a new emerging area of research in the field of hydrodynamic lubrication...

View more